Contact & Advisory Inquiries

Amith Vijayan is available for strategic power system consulting, keynote speaking at international energy forums, and executive advisory on grid modernization.

Email: amithvijayan@gmail.com

Connect on LinkedIn: linkedin.com/in/amithvijayan

Interactive calculation engine and real-time CAD solver available online at https://amithvijayan.in/contact.

Power Systems Operations, AMI & Loss Reduction

Over a 12-year engineering career in power distribution and utility operations at Kerala State Electricity Board Ltd (KSEBL), Amith Vijayan, CEng, has driven regional transmission and distribution performance to 99.9% reliability, implemented advanced automated metering infrastructure (AMI), and systematically reduced AT&C technical and commercial losses.

Chartered Engineer (CEng) certified by The Institution of Engineers (India) (IEI)
99.9% grid reliability sustained across regional distribution networks
15% non-technical losses reduced through automated telemetry and smart metering audits
8.6% technical losses sustained through feeder optimization and conductor reconductoring
500+ engineers, utility technicians, and community members trained in energy conservation and substation safety
Invited Keynote Speaker at CIRED 2019 (Madrid, Spain) on Smart Grid Digitisation and Distribution Strategies

44 Precision Electrical & Power Engineering Calculators

Free, client-side, standards-compliant engineering calculators designed for utility engineers, power system planners, and clean energy developers:

1. Residential & Prosumer Sizing

PM Surya Ghar Solar Subsidy & Generation Calculator — Rooftop solar PV generation, net metering credits, and direct subsidy calculations.
Home Battery & Blackout Backup Modeler — Lithium LFP battery bank duration, critical circuits autonomy, and diesel avoidance savings.
Microgrid Peer-to-Peer (P2P) Power Exchange Clearing — Transactive energy trading, DISCOM wheeling tariffs, and locational marginal pricing per IEEE 2030.7.

2. Power Systems & Sizing

IEC 60909 Symmetrical 3-Phase Short-Circuit Calculator — Fault levels, breaking capacity, and peak making currents.
LV/MV Cable Sizing & Voltage Drop Calculator (IEC 60287 / IS 7098) — Ampacity derating, thermal short-circuit withstand, and run voltage drops.
Transformer Fault Current & Sizing Calculator (IEC 60076) — Full-load current, %impedance fault levels, and breaker trip ratings.
Transformer Full-Load Current & HV Fuse Sizing (IEC 60282-1) — Primary backup fuse links and 12x magnetizing inrush ride-through.
Transformer Percentage Impedance to Ohms Converter (IEC 60076-1) — Physical ohmic impedance referred to HV and LV sides.
Transformer Voltage Regulation & Voltage Drop (IEC 60076-1 Annex C) — Voltage drop and percentage regulation across lagging and leading power factors.
Transformer Efficiency & Part-Load Loss Modeler (IEC 60076-1) — Core iron and copper loss efficiency across 25% to 125% load points.
Transformer Maximum Efficiency Operating Load (IEC 60076) — Optimal loading level where iron losses equal load copper losses.
On-Load Tap Changer (OLTC) Step Voltage Modeler (IEC 60214-1) — Bus voltage stepping and discrete tap changer AVR deadbands.
Parallel Transformer Load Sharing & Division (IEC 60076-8) — Load division across transformers with unequal MVA ratings or impedances.
Transformer Magnetizing Inrush Current & ANSI 50 Relay Pickup (IEEE C57.12) — Peak inrush current and instantaneous overcurrent coordination.
Distribution Transformer Sizing from Load & Growth (IEEE C57.96) — Connected load, demand factor, and multi-year load growth sizing.
Transformer Short-Circuit Thermal Withstand Capability (IEC 60076-5) — Adiabatic final temperature and 250°C copper limit verification.
Transformer Vector Group Phase Displacement & Paralleling (IEC 60076-1) — Angular phase displacement and parallel compatibility check.
Power Factor Correction & Shunt Capacitor Sizing (IEEE 18 / 519) — kVAr requirements, utility penalty elimination, and resonance risk checks.
Current Transformer (CT) Sizing & Saturation Calculator (IEC 61869-2) — Class 5P20/PS burden and saturation knee-point voltage (Vk).
Per-Unit (pu) System Calculator (IEEE 399) — Base MVA/kV normalization across multi-voltage electrical networks.
Per-Unit Base Conversion Calculator (IEEE 399) — Re-base equipment impedances from manufacturer nameplates to common study bases.
Symmetrical Components Calculator (IEC 61000-4-30) — Fortescue decomposition into positive, negative, and zero sequence phasors.
Sequence Impedance Calculator (IEEE 142 / IEC 60909) — Z1, Z2, Z0 modeling and IEEE 142 effective grounding checks.
Three-Phase Fault Calculator (IEC 60909) — Symmetrical short-circuit fault MVA and peak current evaluation.
LG / LL / LLG Fault Calculator (IEC 60909-0) — Unsymmetrical fault analysis and healthy phase voltage rises.
Radial Feeder Load Flow Calculator (IEEE 141) — Iterative Backward/Forward Sweep solver for multi-node distribution networks.
Voltage Profile & Feeder Remediation Analysis (IEC 60038) — Feeder voltage drop modeling and shunt capacitor remediation.

3. Substations & Assets

Transformer Health Index (HI) & Aging Modeler (IEEE C57.91) — DGA Duval Triangle, oil BDV, and furfural paper loss-of-life.
Neutral Earthing Resistor (NER) Sizing Calculator (IEEE C57.32) — Resistance (Ω), continuous ampacity, and thermal energy dissipation.
Zigzag Grounding Transformer Zero-Sequence Impedance (IEEE C57.32) — Z₀ calculation and earth fault current rating for ungrounded systems.
Transformer Loss Capitalization & Lifecycle Cost TCO (IEEE C57.12.00) — Capitalized cost of no-load (A) and load (B) losses.
Transformer Top-Oil & Winding Temperature Rise (IEC 60076-2) — ONAN, ONAF, and OFAF thermal rise and hot-spot modeling.
Transformer Winding Resistance 75°C Correction (IEEE C57.12.90) — Temperature correction and phase unbalance percentage.
Transformer Turns Ratio (TTR) Test & Error Evaluation (IEC 60076-1) — Ratio error verification against statutory ±0.5% tolerance.
Bushing Power Factor, Tan Delta & Capacitance (IEEE C57.19.100) — 20°C dissipation factor normalization and C₁ Doble test deviation.
Transformer DGA Gas Generation Rate & TDCG Modeler (IEEE C57.104) — Daily gas rates in ppm/day and Condition 1-4 monitoring.
Substation DC Battery Bank & Charger Sizing (IEEE 485) — Stationary 110V/220V Ah bank capacity and duty cycle pulse loads.
Substation Earthing Grid & Potential Modeler (IEEE Std 80) — Grid resistance (Rg), ground potential rise (GPR), and touch/step voltages.
Transmission Line Parameters & Engineering Suite (IEEE 738 / IEC 60865 / CIGRE) — GMD/GMR, inductance, capacitance, SIL, ABCD matrices, thermal ampacity, sag/tension, right-of-way clearances, and reactive compensation.

4. Clean Energy & Storage

C&I & Grid-Scale BESS Sizing & 20-Year Dispatch (IEEE 2800 / IEC 62933) — Power (MW) and energy (MWh) storage optimization and degradation.
Solar LCOE & Grid Parity Cashflow Engine (NREL SAM / IRENA) — 25-year Levelized Cost of Electricity, IRR, and payback cash flows.
Carbon Offset & Scope 2 Emission Modeler (GHG Protocol) — Grid emission factor abatement and tree planting equivalencies.
EV Charging Hub Demand & Feeder Sizing (IEC 61851) — Simultaneity demand, service transformer sizing, and cable runs.
Solar PV Single Line Diagram (SLD) & 2-Sheet CAD Generator (IS 3043 / DEWA / EMA / G99 / SEC / IEEE / IEC) — Multi-sheet CAD electrical SLD, 14-point statutory verification register, and vector A3 PDF submittal bundle conforming to India, Dubai, Singapore, UK/EU, KSA, and USA.

Publications & Industry Books

"When Sparks Become Soul: A Memoir of Struggle, Resilience, and High-Voltage Transformation"

Published memoir chronicling personal and engineering resilience through electrical utility challenges. Available on Amazon.

"Unleashing the Power of Advanced Metering Infrastructure: A Comprehensive Guide for Electric Utilities"

Comprehensive utility project guide detailing AMI planning, meter head-end procurement, cybersecurity, and consumer analytics.